Skip to the content.

This page provides a description of all the APIs and components involved in a FW/1 application. Please also read the Roadmap to see how things may change in the future.

FW/1 Controllers

A controller in a FW/1 application does not need to extend any base component.

A controller method is passed a single struct called rc (request context). This structure initially contains all the URL and form scope variables passed into the request. Form scope takes precedence (i.e., when the same key appears in both URL and form scope, the value for that key in the request context is taken from form scope).

A controller communicates data to other parts of a FW/1 application by adding data to rc.

The following public methods are significant in a controller (and are all optional):

If the controller needs to invoke FW/1 API methods (see framework.one below), the controller must either depend on property framework; (and have accessors=true on the component tag) or have a constructor (a method called init()) that accepts an instance of the FW/1 CFC, as the fw argument, and saves it for use in other methods. The following is the recommended way to write your controller’s constructor:

function init(fw) {
    variables.fw = fw;
    return this;
}

Within other controller methods, you can then invoke FW/1 API methods using variables.fw.apimethod(args) if you use this constructor approach, or variables.framework.apimethod(args) if you use the property framework; approach.

Your Application.cfc is also considered a controller and if it defines before() or after() methods, those will be called at the start and end of the controller lifecycle. Unlike other controllers, it does not need an init() method and instead of referring to the FW/1 API methods via variables.fw... you can just use the API methods directly - unqualified - since Application.cfc extends the framework and all those methods are available implicitly. _Note: if you use the Alternative Application Structure where Application.cfc does not extend framework.one, then these methods would go in your equivalent to MyApplication.cfc (whatever you’ve called it).

A controller is instantiated on the first request to an item in that section and is cached in application scope. You can ask FW/1 to reload the cache at any point (by default, you add ?reload=true to the URL).

You can abort processing of controllers and services by calling variables.fw.abortController() which throws an exception that is caught by the framework. Execution of the current controller is immediately aborted and execution continues with setupView(). If your controller code catches and swallows the exception (e.g., by catch ( any e )), execution of your controller code will proceed through your catch statement and on until it returns but at that point the framework will not execute any further controllers and execution continues with setupView().

FW/1 Views

All views execute as included files within the context of a FW/1 request, i.e., inside the current request’s instance of Application.cfc. That means that all methods inside FW/1 and inside your Application.cfc are available directly inside your views. See the public API documentation below for what you can and should use of those methods! This means that you can have view helper methods in your Application.cfc, either directly or via an include of a library file. Or your equivalent of MyApplication.cfc if you are using the Alternative Application Structure).

This process also means that you are mostly free of thread safety issues (because each request automatically has its own context). That said, you need to be cognizant of two things when storing data in the variables scope of a view:

You can avoid those concerns by using local scope for any new variables introduced inside the view. In addition to local scope, each view also has a local rc variable which is the request context struct. This is the recommended way for views to communicate if they have a need to do so (e.g., setting a page title in a view so that a layout or later view can render it). rc contains whatever data the controller(s) have provided, as well as what was originally in the URL and/or form scopes.

The following variables are also available but should not be relied upon as they are implementation details that may change in the future:

Any other variables assigned to by a view (without a scope qualifier - or explicitly with variables scope) are part of the FW/1 instance.

If no matching view file exists for a request, onMissingView() is called and whatever is returned is used as the text of the view, and layouts are applied (unless they are suppressed). The default implementation is to throw an exception but by overriding this method you can create any behavior you want for requests that have no specific view, e.g., you can return a default view or pretty much anything you want.

As noted in the Developing Applications Manual, onMissingView() will be called if your application throws an exception and you have not provided a view for the default error handler (main.error - if defaultSection is main). This can lead to exceptions being masked and instead appearing as if you have a missing view!

If you do not provide onMissingView() – or your error handler view is missing – then a FW1.viewNotFound exception will be thrown and if you have specified an action via missingview in your framework configuration, that action will be taken instead of the default error action. New in 4.1.

FW/1 Layouts

Everything that applies to views above also applies to layouts. The variables that are available to layouts are the same as for views without args and with just one addition:

Layouts have exactly the same access to the FW/1 API as views and all the same considerations apply.

Request Scope

FW/1 uses the request scope fairly extensively to pass data between parts of the application in order to keep things simple and decoupled (from a developer’s point of view). This section documents all of the request scope variables used by the framework. In general, you should not reference any of these request scope variables: there are supported API methods that you should use instead for the data that you might want to access (and those are documented in the following list).

Request variables:

Where there is no API method, there is generally an underlying assumption that a developer should not need access to that data. If it turns out that developers are commonly referring to the underlying request scope variables due to various needs, the addition of API methods might be considered.

framework.one

This section documents every public method in FW/1’s core file.

These methods are callable from outside the framework and are intended to be used with controllers, layouts and views or may be intended to be overridden in your Application.cfc. Technically, methods in FW/1 do not need to be public to be called from within layouts, views or Application.cfc but for the most part, the convention is: if it’s public, it’s documented and guaranteed to remain part of the API; if it’s private, whilst it may be called within layouts, views and Application.cfc it is not recommended.

public void function abortController()

Attempts to immediately abort execution of the current controller by throwing an exception (which is caught by the framework). If your controller catches this exception, even by accident (such as catch ( any e )), execution will continue inside your controller until it returns. No further controller methods will be called. Execution will continue with the setupView() lifecycle method and views and layouts will then be rendered.

public boolean function actionSpecifiesSubsystem( string action )

Returns true if the action contains a colon : (default - framework.subsystemDelimiter). Returns false if the action does not contain a colon : (default - framework.subsystemDelimiter).

public void function addRoute( any routes, string target, any methods = [ ], string statusCode = ‘’ )

Allows you to programmatically add a new route to FW/1’s known route mappings. routes can be either an array of route patterns or a single route pattern. target is the URL to map those routes to. methods is optional and can be either an array of HTTP methods or a single HTTP method for which those routes should be mapped. statusCode is optional and if present is prefixed to the target URL (and represents the HTTP status returned when the routes are processed.

public string function buildCustomURL( string uri )

Used in views and layouts to generate route-based links. Generates a URL prefix, the same way buildURL() does, and appends uri.

public string function buildURL( string action = ‘.’, string path = see below, any queryString = ‘’ )

Used in views and layouts to generate links to FW/1 actions. Produces “traditional” links if variables.framework.generateSES is false and the current request used a “traditional” URL. Produces “SES” links if variables.framework.generateSES is true or the current request used an “SES” URL. The optional path argument allows you to override the default base URL used for links in the same way that redirect() allows below. Note that specifying path will disable generation of “SES” links! path will default to the result of calling getBaseURL() which in turn defaults to variables.framework.baseURL, unless overridden by a subsystem-specific configuration.

The optional queryString argument allows you to specify URL variables (and values) that should be added to the generated URL. In general, variable / value pairs should be specified with an equals = and separated with an ampersand & and they will be appended either as-is, for “traditional” link generation, or converted to “SES” format as appropriate. The “SES” conversion can be overridden by preceding a sequence of variable / value pairs with ? in which case such arguments will be appended as-is for both forms of generated link. Finally, an HTML anchor may be specified, preceded by # and that will be appended to the final URL. queryString also accepts a structure, which is converted to an HTML escaped query string.

As a shortcut, the action may include the queryString value, separated by ? like this: 'section.item?arg=val' (with all the same considerations for embedded & and ? and # characters). action can be '.', in which case a link to the current section and item is returned.

Here are some examples:

buildURL( 'product.list' )

Will generate:

Will generate:

Will also generate:

Will generate a URL based on the current section - a section-relative link to the current section’s list item.

buildURL( action = 'product.detail', queryString = { id = 76, img = 'small' } )

Will generate:

public void function controller( string action )

Call this from your Application.cfc methods to add to the queue of controllers that will be called by the framework. The action is used to identify the controller that should be called, e.g., "app1:section.item", "section.item" or "section" (which will call the default item with that section).

A typical example is to trigger a security controller method invoked from setupRequest(), e.g.,

function setupRequest() {
    controller( 'security.checkAuthorization' );
}

You may only queue up additional controllers prior to the start of controller execution (in onRequest()). If you attempt to queue up additional controllers in controller methods (or later in the request), you will get an exception because at that point all controllers have been queued up and/or executed.

Just like the implicit controller invocation, before(), item(), and after() are all invoked appropriately if present. If multiple methods are queued up from a single controller, before() and after() are executed just once (for each controller).

public string function customizeViewOrLayoutPath( struct pathInfo, string type, string fullPath )

By default, this simply returns fullPath.

It can be overridden to provide customized handling of view and layout locations. Everywhere that FW/1 needs to figure out the location of a view or layout based on conventions, it calls this method. See the skinning example in the FW/1 distribution that shows how this method can be used to provide automatic overrides of the default conventions.

The arguments are as follows:

Additional documentation will be provided for this feature in due course. Probably an entire section on skinning applications with FW/1.

public any function customTemplateEngine( string type, string path, struct scope )

By default, this simply returns no value (null).

It can be overridden to provide a custom rendering engine (non-CFML). If it returns a string, the internalView() and internalLayout() functions will skip including the CFML template that the view (or layout) would normally be used. See the mustache example.

public void function disableFrameworkTrace()

Disable framework tracing for this request.

public void function disableLayout()

Disable layouts for this request. Equivalent to request.layout = false;.

public void function enableFrameworkTrace()

Enable framework tracing for this request.

public void function enableLayout()

Enable layouts for this request. Equivalent to request.layout = true;.

public void function frameworkTrace( string message [, any value ] )

Adds the message and optional value to the framework trace data, for rendering at the end of the request.

public string function getAction()

Returns the name of the action variable in the URL or form post (variables.framework.action).

public string function getBaseURL()

Returns the configured variables.framework.baseURL value. Can be overridden in Application.cfc to provide a customized value, e.g., per request.

public any function getBeanFactory( string subsystem = “” )

Returns whatever the framework has been told is a bean factory (which will be an instance of DI/1 by default). This will return a subsystem-specific bean factory if one exists for the specified subsystem, or for the subsystem of the current request if no subsystem is specified in the call. Otherwise it will return the default bean factory.

If no application bean factory can be found, this will throw an exception. Use hasBeanFactory() and/or hasSubsystemBeanFactory( subsystem ) to determine whether this call will successfully return a bean factory.

public struct function getConfig()

Returns a copy of the framework structure containing the configuration settings specified in Application.cfc. This allows controllers to inspect the FW/1 configuration settings if necessary.

public any function getDefaultBeanFactory()

Returns whatever the framework has been told is a bean factory. This will return the default, top-level bean factory for the application. If no such bean factory exists, this will throw an exception. Use hasDefaultBeanFactory() to determine whether the default, top-level bean factory exists for the application.

public string function getDefaultSubsystem()

If the application is using legacy subsystems, then if the current request’s action specifies a subsystem return that else return the default subsystem configured for the application.

If the application is not using legacy subsystems, return an empty string (since there is no concept of a default subsystem in new style subsystems).

public string function getEnvironment()

Returns an empty string by default. If you want to use the Environment Control feature, you should override this in Application.cfc and have it return the appropriate “tier” or “tier-server” string. See Environment Control in the Developing Applications Manual for more detail.

public string function getEnvVar( string name )

Returns the value of the specified environment variable name (i.e., from the shell environment in which your CFML server was started).

public array function getFrameworkTrace()

Returns an array of the current request’s framework trace data. See setupTraceRender() for one reasonable use.

public string function getFullyQualifiedAction( string action = request.action )

Returns the specified action formatted as module:section.item. If the module name is empty, the subsystem delimiter is also omitted (so then it behaves the same as getSectionAndItem( action ).). See also getSubsystemSectionAndItem() below.

public string function getHostname()

Returns the server’s local hostname (via Java’s InetAddress class). Intended to be used with Environment Control.

public string function getItem( string action = request.action )

Returns the item portion of the specified action - or of the current request’s action if no action is specified. Returns the default item if no item is present in the specified action.

public string function getCGIRequestMethod()

Returns the method (GET, POST, etc) used for the current request. This is a convenience method for controllers to access CGI.REQUEST_METHOD in a clean way via the framework.

public string function getRoute()

Returns the route that was used to initiate the current request (if any). Returns an empty string if the current request was not initiated via a matched route.

public string function getRoutePath()

Returns the path info (SES URL) portion that either matched the current route (if any) or was used as the action for the current request. It is returned in the same format as getRoute(), i.e., $POST/section/item/ or $GET/users/123/ (where getRoute() might return $GET/users/:id).

public array function getRoutes()

Returns (a copy of) variables.framework.routes. This can be overridden in Application.cfc if you want to generate routes dynamically.

public array function getResourceRouteTemplates()

Returns (a copy of) variables.framework.resourceRouteTemplates. This can be overridden in Application.cfc if you want to generate resource templates for routes dynamically.

public string function getSection( string action = request.action )

Returns the section portion of the specified action - or of the current request’s action if no action is specified. Returns the default section if no section is present in the specified action.

public string function getSectionAndItem( string action = request.action )

Returns the specified action - or the current request’s action if no action is specified - formatted as section.item. Automatically strips the subsystem from the action, if present. Automatically adds the default section if not present. Automatically adds the default item if not present.

public string function getSubsystem( string action = request.action )

Returns the subsystem portion of the specified action - or of the current request’s action if no action is specified. If no subsystem is present in the specified action, then if the application is using legacy subsystems returns the default subsystem name else return an empty string.

public string function getSubsystemBase()

Returns the path to the folder where the current request’s subsystem views/ and layouts/ subfolders can be found. This can be useful for customer versions of buildURL() etc.

public any function getSubsystemBeanFactory( string subsystem )

Returns whatever the framework has been told is a bean factory. This will return the bean factory for the named subsystem. If no such bean factory exists, this will throw an exception. Use hasSubsystemBeanFactory( subsystem ) to determine whether a bean factory exists for the named subsystem. If this is the first reference to this subsystem, the subsystem will be initialized.

public struct function getSubsystemConfig( string subsystem )

Returns the configuration for the named subsystem, as a copy of variables.framework.subsystems[subsystem]. If no configuration exists for the named subsystem, an empty struct is returned. FW/1 uses this to retrieve the per-subsystem baseURL value, if any, as part of buildURL() and redirect(), as well as diConfig if you are using DI/1 to manage subsystem bean factories automatically. Including diConfig is new in 3.1.

public string function getSubsystemSectionAndItem( string action = request.action )

This returns the specified action formatted as module:section.item. Unlike getFullyQualifiedAction() above, this always includes the subsystem delimiter even when the module name is empty.

public boolean function hasBeanFactory()

Returns true if a default, top-level bean factory exists. Otherwise returns true if a bean factory exists for the subsystem of the current request, if appropriate. Otherwise returns false. If hasBeanFactory() returns true, calling getBeanFactory() will return a bean factory.

public boolean function hasDefaultBeanFactory()

Returns true if a default, top-level bean factory exists. Otherwise returns false. If hasDefaultBeanFactory() returns true, calling getDefaultBeanFactory() will return a bean factory.

public boolean function hasSubsystemBeanFactory( string subsystem )

Returns true if a bean factory exists for the named subsystem. Otherwise returns false. If hasSubsystemBeanFactory( subsystem ) returns true, calling getBeanFactory( subsystem ) and getSubsystemBeanFactory( subsystem ) will both return a bean factory (for the named subsystem).

public boolean function isCurrentAction( string action )

Returns true if the action passed in matches the currently executing action. This can be useful to figure out which tab to highlight in navigation or make other choices based on actions.

public boolean function isFrameworkReloadRequest()

Returns true if the current request has a valid URL parameter to trigger an application reload or reloadApplicationOnEveryRequest is true.

public boolean function isUnhandledRequest( string targetPath )

By default, returns true if the specified targetPath (as in onRequest()) has an unhandled extension (from variables.framework.unhandledExtensions) or matches an unhandled path (from variables.framework.unhandledPaths). You can override this to dynamically tell FW/1 not to handle specific requests. If you want to still apply the default checks as well as your own custom checks, don’t forget to call super.isUnhandledRequest(targetPath).

public string function layout( string path, string body )

This function renders a layout and could be called inside a view or a layout, although it is recommended to rely on the conventions for layouts where possible. If you decide you need to render a layout directly, you can invoke it like this:

writeOutput( layout( 'main/nav-template', nav_menu ) );

Rendering views, using the view() method, is supported, documented and the recommended way to build composite pages. Layouts should simply wrap views, in a cascade from item to section to site.

As of release 4.0, layout() may be called from a controller to wrap HTML (such as produced by a call to view()). See the view() below for such use cases.

public struct function makeMethodProxies( array methodNames )

If you are running on Java 8, this function will return a struct containing Java-callable proxies for the named methods in FW/1. They will implement the java.util.function.Function interface. See the mustache example.

public function onApplicationStart()

Part of the standard CFML lifecycle, this method is called automatically by the CFML engine at application startup. You should not override this nor call it (even tho’ it is public). Use setupApplication() to perform application-specific initialization.

If you override this method, you must call super.onApplicationStart() or FW/1 will fail to work correctly.

public function onError( any exception, string event )

The standard CFML error handler, this method is called automatically by the CFML engine in the event of an uncaught exception. By default, FW/1 will try to execute the action specified by variables.framework.error. The action that caused the exception, if known, will be available in request.failedAction. The exception and event are available as request.exception and request.event respectively. If the error action fails, FW/1 tries to display the original exception and event in a simple error view (using the private failure() method).

You may override this method in Application.cfc if you wish to provide different error handling behavior. You may call super.onError( exception, event ) if appropriate. You may also consider overriding the failure() method, but that is not documented and not supported.

public string function onMissingView( struct rc )

Called when a view is not found for a request. The default behavior is to call viewNotFound() which throws an exception.

You may override this method to provide alternative behavior when a view is not found. You should either throw an exception or return a string that represents the view that should be rendered instead. For example:

function onMissingView( rc ) {
   return view( 'page/notFound' );
}

As of 4.1, you can specify that the FW1.viewNotFound exception be handled via the missingview action in the configuration, as opposed to the error action.

public void function onPopulateError( any cfc, string property, struct rc )

Called when an exception occurs during an attempt to populate the named property of the specified cfc if no keys were specified for populate() and trustKeys was true. This method does nothing, effectively causing the exception to be ignored.

If you intend to call populate() with no keys specified and you tell it to trust what it finds in the request context, you may wish to override onPopulateError() and do something like log such failed attempts. See populate() below.

public void function onReload()

An extension point so that you can perform operations that may be necessary when FW/1 is about to reload itself. This was originally added so that any resources allocated by beans created by the bean factory could be deallocated prior to the bean factory being recreated.

public function onRequest( string targetPage )

Part of the standard CFML lifecycle, this method is called automatically by the CFML engine to handle each request. You should not override this nor call it (even tho’ it is public).

If you override this method, you must call super.onRequest( targetPage ).

public function onRequestEnd( string targetPage )

Part of the standard CFML lifecycle, this method is called automatically by the CFML engine at the end of each request. You should not override this not call it (even tho’ it is public). Use setupResponse() to perform request-specific finalization.

If you override this method, you must call super.onRequestEnd( targetPage ).

public function onRequestStart( string targetPage )

Part of the standard CFML lifecycle, this method is called automatically by the CFML engine at the beginning of each request. You should not override this nor call it (even tho’ it is public). Use setupRequest() to perform request-specific initialization.

If you override this method, you must call super.onRequestStart( targetPage ).

public function onSessionStart()

Part of the standard CFML lifecycle, this method is called automatically by the CFML engine when each new session is created. You should not override this nor call it (even tho’ it is public). Use setupSession() to perform session-specific initialization.

If you override this method, you must call super.onSessionStart().

public any function populate( any cfc, string keys = “”, boolean trustKeys = false, boolean trim = false, boolean deep = false, any properties = ‘’ )

Automatically populates an object with data from the request context, or from the properties struct if provided. For any public method setKey() on the object or any declared property key;, if that key exists in the source data structure, call the setter with that value. If the optional list of keys is provided, only attempt to call setters for the specified keys in the request context. Mainly useful for populating beans from form posts. Whitespace is permitted in the list of keys for clarity, e.g., "firstname, lastname, email". This approach relies on setter methods and properties in the object. It won’t detect and use onMissingMethod().

You can also specify trim = true and FW/1 will call trim() on each item before calling the setter. Setting deep = true will allow FW/1 to populate nested properties on objects (in child objects).

For populate() to work with onMissingMethod() you need to specify trustKeys = true. If you specify the list of keys, populate() will not test whether the setter exists, it will just call it - which means that onMissingMethod() and property-based setters will be invoked automatically. If you omit the keys, be careful because populate() will cycle through the entire request context and attempt to set properties on the object for everything! A try/catch is used to suppress any exceptions in this case but you need to be aware that this may be a little dangerous if you have a lot of data in your request context that does not match the properties of the object! If an exception is caught, onPopulateError() is called with the object, property name and the request context structure as its three arguments. The default behavior is to simply ignore the exception but you can override that if you want - see onPopulateError() above.

populate() returns the cfc passed in.

Populating Child Objects

If trustKeys = true or if deep = true the populate() method will try to populate data on child objects of the cfc argument. In order to populate a child component “dot” notation is used in the request context’s properties. For example, to set the firstName property on a Contact component that is a child of the cfc that is being passed into populate() the following key would be added to the request context:

contact.firstname

This would cause populate() to traverse the cfc argument like so:

cfc
|-- getContact
|    |-- setFirstName

Child properties can also be nested many levels deep. The following key would populate the line1 property of an address CFC that is a child of the contact CFC that is a child of the cfc argument passed into the populate() method:

contact.address.line1

This would cause populate() to traverse the cfc argument like so:

cfc
|-- getContact
|    |-- getAddress
|    |    |-- setLine1

public struct function processRoutes( string path, array routes, string httpMethod = request._fw1.cgiRequestMethod )

Given a path, and an array of routes, and an optional httpMethod, process the routes to see if any matched and return a struct with a matched flag and if that’s true also route and path values. Route matching is case-sensitive by default but this can be overridden by setting routesCaseSensitive to false in FW/1’s configuration.

public void function redirect( string action, string preserve = “none”, string append = “none”, string path = see below, any queryString = ‘’, string statusCode = ‘302’, string header = ‘’ )

This constructs a URL based on the action and optional path and redirects to it. If preserve is "all", the entire contents of the request context are saved to session scope across the redirect (and restored back to the request context automatically after the redirect). If preserve is a list of keys, just those elements of the request context are preserved. If append is "all", all simple values in the request context are appended to the constructed URL as a query string before the redirect. If append is a list of keys, just those elements of the request context are appended (if they are simple values). The statusCode argument lets you specify the HTTP status code for the redirect so you can override the default value of 302. As of release 3.5 queryString also accepts a structure, which is converted to an HTML escaped query string.

If path is specified, that base URL is used instead of the default, as per buildURL() above.

The queryString argument may be used to append additional URL variables / values to the constructed URL, as explained in buildURL() above. Or the query string value may be combined with the action also as explained in buildURL() above.

For example:

variables.fw.redirect( action = 'blog.entry', append = 'id', queryString = '##comment' )

Will generate:

If header is provided (as a non-empty string), instead of performing an actual redirect, FW/1 will set the named HTTP header to the target URL and then abort the controller lifecycle. This allows custom handling of “redirects” in AJAX-based applications.

public void function redirectCustomURL( string uri, string preserve = ‘none’, string statusCode = ‘302’, string header = ‘’ )

This is to redirect() as buildCustomURL() is to buildURL().

public any function renderData()

Call this from your controller to tell FW/1 to skip views and layouts and instead render data in the specified content type format.

This function returns a “builder” expression (new in 4.0) that supports the following methods:

This “builder” expression can be retrieved at any time in a controller by calling renderer() (below). New in 4.0.

The following restrictions apply to the data payload, for each type as shown:

If a function or closure is passed as the type, you can perform pretty much any custom rendering you can imagine. See Custom Data Rendering in the Developing Applications Guide for more detail on how to use this.

When you call renderData(), processing continues in your controller (so use return; if you want processing to stop at that point), and subsequent calls to setView() or setLayout() will have no effect (since FW/1 will ignore views and layouts for this request).

For legacy application support, the following form of renderData() is still supported in 4.0:

public any function renderData( string type = "", any data = "", numeric statusCode = 200, string jsonpCallback = "" )

Although this form is deprecated, FW/1 will only issue a deprecation warning (written to the console log) for statusCode and jsonpCallback in 4.0. In a future release, these will require a framework setting in order to be used and the type and data arguments will cause deprecation warnings.

public any function renderer()

This returns the same “builder” expression that renderData() returns so that you can add settings and headers piecemeal in your controllers. New in 4.0.

public void function sessionDefault( string keyname, string defaultValue )

Extension point that is used to set a default value for a session variable. Use sessionWrite() to set a non-string value. New in 4.1.

public void function sessionDelete( string keyname )

Extension point that is used to delete a session variable. New in 4.1.

public boolean function sessionHas( string keyname )

Extension point that is used to check whether a session variable exists. New in 4.1.

public void function sessionLock( required function callback )

Extension point that is used execute code inside a “session lock” (however that works for your pluggable session handling). New in 4.1.

public any function sessionRead( string keyname )

Extension point that is used to read a session variable. New in 4.1.

public void function sessionWrite( string keyname, any keyvalue )

Extension point that is used to write to a session variable. New in 4.1.

public void function setBeanFactory( any factory )

If you are manually creating a bean factory, call this from your setupApplication() method to tell the framework about your primary (default) bean factory. By default FW/1 will use DI/1 as the bean factory and you won’t have to worry about this.

As of release 3.5, if you call this without telling FW/1 diEngine = "none" to disable automatic bean factory management, you will get an exception. If, for some reason, you want to do this anyway, you can set diOverrideAllowed = true in the framework configuration but it would almost certainly be better to set diEngine = true!

public void function setLayout( string action, boolean suppressOtherLayouts = false )

Call this to tell the framework to use a new action module:section.item as the basis of the lookup process for the layouts for the current request. This allows you to override the default convention for choosing the layouts. If you specify suppressOtherLayouts as true, then only the most specific layout will be used and the usual cascade of layouts will be turned off for this request.

public void function setSubsystemBeanFactory( string subsystem, any factory )

Call this to tell the framework about a subsystem-specific bean factory. The bean factory must support containsBean( name ) and getBean( name ). You would typically call this method from your setupSubsystem() method unless you are using DI/1 and allowing FW/1 to manage all your bean factories for you (the default behavior).

public void function setupApplication()

Override this in your Application.cfc to provide application-specific initialization. If you want the framework to use a non-default bean factory, this is where you should call setBeanFactory( factory ). You do not need to call super.setupApplication().

public void function setupEnvironment( string env )

Override this in your Application.cfc to provide environment-specific initialization. See Environment Control in the Developing Applications Manual for more detail.

public void function setupRequest()

Override this in your Application.cfc to provide request-specific initialization. You do not need to call super.setupRequest(). Since you do not have access to rc here, you may also want to define before() in Application.cfc to act as an initialization controller, to populate the request context prior to other controllers being executed.

public void function setupResponse( struct rc )

Override this in your Application.cfc to provide request-specific finalization. This is called after all views and layouts have been rendered or immediately before a redirect. You do not need to call super.setupResponse().

public void function setupSession()

Override this in your Application.cfc to provide session-specific initialization. You do not need to call super.setupSession().

public void function setupSubsystem( string subsystem )

Override this in your Application.cfc to provide subsystem-specific initialization. If you want the framework to use non-default subsystem-specific bean factories for any subsystems, this is where you should call setSubsystemBeanFactory( subsystem, factory ). See the example in Using Subsystems for more details. You do not need to call super.setupSubsystem().

public void function setupTraceRender( string output = ‘html’ )

This is called when the framework trace is about to be rendered at the end of a request. output will be either 'html' or 'data' depending on whether FW/1 has output HTML using views and layouts or rendered data in the current request. You can override it to take control of the rendering process yourself (for whatever reason such as saving the trace data to a database perhaps or providing a fancier rendering?). You can call getFrameworkTrace() to obtain the framework’s trace data (note that this will be a copy on Adobe ColdFusion but just a reference on Lucee and Railo), and do whatever you want with it. It’s probably a good idea to call disableFrameworkTrace() to prevent any further additions to the framework trace data. Note: this method used to be called only when FW/1 was outputting HTML and not rendering data, however, it is now called whenever tracing is enabled. If you were using this method to render trace data in a custom format at the end of HTML requests, you will find your rendered trace data appended to your request data when renderData() is used. In order to maintain your current functionality, you can easily fix this by checking that the output argument is equal to 'html' before rendering the trace data.

public void function setupView( struct rc )

Override this in your Application.cfc to provide pre-rendering logic, e.g., putting globally available data into the request context so it is available to all views. You do not need to call super.setupView().

public void function setView( string action )

Call this to tell the framework to use a new action module:section.item as the basis of the lookup process for the view and layouts for the current request. This allows you to override the default convention for choosing the view and layouts. A possible use for this is when redisplaying a form view when errors are present (i.e., from the form processing controller method, without using a redirect).

public boolean function usingSubsystems()

Returns true if the application is using legacy subsystems, i.e., variables.framework.usingSubsystems is true. Otherwise returns false. Not relevant to new style subsystems.

public string function view( string path, struct args = { }, any missingView = { } )

This renders a view and returns the output of that view as a string. It is intended to be used primarily inside layouts to render fragments of a page such as menus and other common elements. Elements of the args structure are appended to the local scope accessible inside the view file. For example:

<cfoutput>
  <div>#view( 'common:site/header' )#</div>
  <div>#view( 'nav/fragment/menu', { selected = 'home' } )#</div>
  <div>#body#</div>
  <div>#view( 'common:site/footer' )#</div>
</cfoutput>

This renders the header and footer items (views) from the common subsystem’s site section (i.e., subsystems/common/views/site/header.cfm and footer.cfm) and the fragment/menu item (view) from the current subsystem’s nav section (i.e., views/nav/fragment/menu.cfm). Inside menu.cfm, local.selected would be available containing the string "home".

A controller may call view() which can be useful if you have email templates that need to be rendered and sent as part of a request: those email templates can be treated as views and have all the associated rc, local, etc machinery applied. As of release 4.0, a controller may also call layout() to wrap a view for such purposes.

If the argument missingView is not specified, and the specified view path does not exist, then onMissingView() will be called. If a string is passed as missingView and the specified view does not exist, then the value of the missingView argument will be returned. This allows for programmatically calculated views to be silently rendered as empty strings if they are not present. This can be useful for programmatic skins with optional elements.