FW/1 is intended to allow you to quickly build applications with the minimum of overhead and interference from the framework itself. The convention-based approach means that you can quickly put together an outline of your site or application merely by creating folders and files in the views folder. As you are ready to start adding business logic to the application, you can add controllers and/or services and domain objects as needed to implement the validation and data processing.

Basic Application Structure

FW/1 applications must have an Application.cfc that extends framework.one and an empty index.cfm as well as at least one view (under the views folder). Typical applications will also have folders for controllers, a model, containing subfolders for services and beans, and layouts. The folders may be in the same directory as Application.cfc / index.cfm or may be in a directory accessible via a mapping (or some other path under the webroot). If the folders are not in the same directory as Application.cfc / index.cfm, then variables.framework.base must be set in Application.cfc to identify the location of those folders.

Note: because Application.cfc must extend the FW/1 /framework/one.cfc, you need a mapping in the CFML administrator. An alternative approach is to simply copy the framework folder to your application’s web root. This requires no mapping - but means that you have the framework CFCs as web-accessible resources.

The views folder contains a subfolder for each section of the site, each section’s subfolder containing individual view files (pages or page fragments) used within that section. Note that if your operating system is case-sensitive, all view folders and filenames must be all lowercase.

The layouts folder may contain general layouts for each section and/or a default layout for the entire site. The layouts folder may also contain subfolders for sections within the site, which in turn contain layouts for specific views. Note that if your operating system is case-sensitive, all layout folders and filenames must be all lowercase.

The controllers folder contains a CFC for each section of the site (that needs a controller!). Each CFC contains a method for each requested item in that section (where control logic is needed). Again, controller CFC filenames must be all lowercase if your operating system is case-sensitive.

You would typically also have a model folder containing CFCs for your services and your domain objects - the business logic of your application. The convention is to have your domain objects in a beans subfolder and all your singleton service CFCs in a services subfolder. FW/1 and DI/1 use a convention where you typically reference model instances via a name that is the name of the CFC followed by the singular of the subfolder, e.g., productService, userBean but that behavior can be configured.

An application may have additional web-accessible assets such as CSS, images and so on.

Views and Layouts

Views and layouts are simple CFML pages. Both views and layouts are passed a variable called rc which is the request context (containing the URL and form variables merged together). Layouts are also passed a variable called body which is the current rendered view. Both views and layouts have direct access to the full FW/1 API (see below).

The general principle behind views and layouts in FW/1 is that each request will yield a unique page that contains a core view, optionally wrapped in a section-specific layout, wrapped in a general layout for the site. In fact, layouts are more flexible than that, allowing for item-specific layouts as well as section-specific layouts. See below for more detail about layouts.

Both views and layouts may invoke other views by name, using the view() method in the FW/1 API. For example, the home page of a site might be a portal style view that aggregates the company mission with the latest news. views/home/default.cfm might therefore look like this:

<cfoutput>
  <div>#view('company/mission')#</div>
  <div>#view('news/list')#</div>
</cfoutput>

This would render the company.mission view and the news.list view.

Note: The view() method behaves like a smart include, automatically handling subsystems and providing a local scope that is private to each view, as well as the rc request context variable (through which views can communicate, if necessary). No controllers are executed as part of a view() call. Additional data may be passed to the view() method in an optional second argument, as elements of a struct that is added to the local scope.

Views and Layouts in more depth

As hinted at above, layouts may nest, with a view-specific layout, a section-specific layout and a site-wide layout. When FW/1 is asked for section.item, it looks for layouts in the following places:

For a given action (section.item) up to three layouts may be found and executed, so the view may be wrapped in a view-specific layout, which may be wrapped in a section-specific layout, which may be wrapped in a site-wide layout. To stop the cascade, set request.layout = false; in your view-specific (or section-specific) layout. This allows for full control in authoring section and/or page specific layouts which may be very different from your site-wide layout.

By default, FW/1 selects views (and layouts) based on the action initiated, subsystem:section.item but that can be overridden in a controller by calling the setView() and setLayout() methods to specify a new action to use for the view and layout lookup respectively. This can be useful when several actions need to result in the same view, such as redisplaying a form when errors are present.

For example, in your product.list controller method, you could call setLayout( 'general.list' ) and FW/1 would look for layouts/general/list.cfm and layouts/general.cfm instead of layouts related to product.list. In addition, you can pass true as the second argument to setLayout() and cascading is automatically disabled (so only the specified layout will be applied).

The view and layout CFML pages are actually executed by being included directly into the framework CFC. That’s how the view() method is made available to them. In fact, all methods in the framework CFC are directly available inside views and layouts so you can access the bean factory (if present), execute layouts and so on. It also means you need to be a little bit careful about unscoped variables inside views and layouts: a struct called local is available for you to use inside views and layouts for temporary data, such as loop variables and so on.

It would be hard to give a comprehensive list of variables available inside a view or layout but here are the important ones:

In addition, FW/1 uses a number of request scope variables to pass data between its various methods so it is advisable not to write to the request scope inside a view or layout. See the Reference Manual for complete details of request scope variables used by FW/1.

It is strongly recommended to use the local struct for any variables you need to create yourself in a view or layout!

If you have data that is needed by all of your views, it may be convenient to set that up in your setupView() method in Application.cfc - see Taking Actions on Every Request below.

Rendering Data to the Caller

If you want to return plain text, XML, or JSON from a request instead of rendering an HTML view, you can use the renderData() API to bypass views and layouts completely and automatically return data rendered as JSON, XML, or plain text to your caller, with the correct content type automatically set. See below for more details.

Designing Controllers

Controllers are the pounding heart of an MVC application and FW/1 provides quite a bit of flexibility in this area. The most basic convention is that when FW/1 is asked for section.item it will look for controllers/section.cfc and attempt to call the item() method on it, passing in the request context as a single argument called rc and controllers may call into the application model as needed, then render a view.

Controllers are cached in FW/1’s application cache so controller methods need to be written with thread safety in mind (i.e., use var to declare variables properly!). Any setXxx() methods on a controller CFC may be used by FW/1 to autowire beans from the bean factory into the controller when it is created. In addition, if you add accessors=true to your controller’s component tag, you can declare dependencies with the property keyword are those will be autowired by FW/1. property-based injection is the preferred approach.

In addition, if you need certain actions to take place before all items in a particular section, you can define a before() method in your controller and FW/1 will automatically call it for you, before calling the item() method. This might be a good place to put a security check, to ensure a user is logged in before they can execute other actions in that section. The variable request.item contains the name of the controller method that will be called, in case you need to have exceptions on the security check (such as for a main.doLogin action that attempts to log a user in).

Similarly, if you need certain actions to take place after all items in a particular section, you can define an after() method in your controller and FW/1 will automatically call it for you, after calling the item() method.

Note that your Application.cfc is also considered to be a controller and if it defines before() and/or after() methods, those are called as part of the lifecycle, around any regular controller methods. Unlike other controllers, it does not need an init() method and instead of referring to the FW/1 API methods via variables.fw... you can just use the API methods directly - unqualified - since Application.cfc extends the framework and all those methods are available implicitly.

Here is the full list of methods called automatically when FW/1 is asked for section.item :

Methods that do not exist are not called.

Using onMissingMethod() to Implement Items

FW/1 supports onMissingMethod(), i.e., if a desired method is not present but onMissingMethod() is defined, FW/1 will call the method anyway. That applies to all three potential controller methods: before, item, and after. That means you must be a little careful if you implement onMissingMethod() since it will be called whenever FW/1 needs a method that isn’t already defined. If you are going to use onMissingMethod(), I would recommend always defining before() and after() methods, even if they are empty. Calls to onMissingMethod() are passed two arguments in missingMethodArguments: rc and method which is the type of the method being invoked ("before", "item" - literally, regardless of the actual requested item, "after").

Using onMissingView() to Handle Missing Views

FW/1 provides a default onMissingView() method for Application.cfc that throws an exception (view not found). This allows you to provide your own handler for when a view is not present for a specific request. Whatever onMissingView() returns is used as the core view and, unless layouts are disabled, it will be wrapped in layouts and then displayed to the user. Make sure you return a string value!

Be aware that onMissingView() will be called if your application throws an exception and you have not provided a view for the default error handler (main.error - if your defaultSection is main). This can lead to exceptions being masked and instead appearing as if you have a missing view!

Taking Actions on Every Request

FW/1 provides direct support for handling a specific request’s lifecycle based on an action (either supplied explicitly or implicitly) but relies on your Application.cfc for general lifecycle events. That’s why FW/1 expects you to write per-request logic in setupRequest() (or before() if you need to interact with rc), per-session logic in setupSession() and application initialization logic in setupApplication(). In addition there is setupView() which is called just before view rendering begins to allow you to set up data for your views that needs to be globally available, but may depend on the results of running controllers or services.

If you have some logic that is meant to be run on every request, the best way is generally to implement setupRequest() in your Application.cfc and have it queue up the desired controller method by name, like this:

function setupRequest() {
    controller( 'security.checkAuthorization' );
}

This queues up a call to that controller at the start of the request processing, calling before(), checkAuthorization(), and after() as appropriate, if those methods are present.

Note that the request context itself is not available at this point! setupRequest() is to set things up prior to the request being processed. If you need access to rc, you will want to implement before() in your Application.cfc which is a regular controller method that is called before any others (including before() in other controllers which get queued up):

function before( struct rc ) {
    // set up your RC values
}

If you need to perform some actions after controllers and services have completed but before any views are rendered, you can implement setupView() in your Application.cfc and FW/1 will call it after setting up the view and layout queue but before any rendering takes place:

function setupView( struct rc ) {
    // pre-rendering logic
}

You cannot call controllers here - this lifecycle method is intended for common data setup that is needed by most (or all) of your views and layouts. If services from your model have been autowired into Application.cfc, you can call those.

Finally, there is a lifecycle method that FW/1 calls at the end of every request - including redirects - where you can implement setupResponse() in your Application.cfc:

function setupResponse( struct rc ) {
    // end of request processing
}

This is called after all views and layouts have been rendered in a regular request or immediately before the redirect actually occurs when redirect() has been called. You cannot call controllers here. If services from your model have been autowired into Application.cfc, you can call those.

Short-Circuiting the Controller / Services Lifecycle

If you need to immediately halt execution of a controller and prevent any further controllers or services from being called, use the abortController() method. See the Reference Manual for more details of abortController(), in particular how it interacts with exception-handling code in your controllers.

Controllers for REST APIs

You can return data directly to the caller, bypassing views and layouts, using the renderData() function.

variables.fw.renderData( contentType, resultData );

Calling this function does not exit from your controller, but tells FW/1 that instead of looking for a view to render, the resultData value should be converted to the specified contentType and that should be the result of the complete HTTP request.

contentType may be "html", "json", "jsonp", "rawjson", "xml", or "text". The Content-Type HTTP header is automatically set to:

respectively. For JSON and JSONP, the resultData value is converted to a string by calling serializeJSON() (so use RAWJSON if your resultData value is already a valid JSON string); for XML, the resultData value is expected to be either a valid XML string or an XML object (constructed via CFML’s various xml...() functions); for plain text and HTML, the resultData value must be a string. "html", "jsonp" and "rawjson" are new in 3.1.

For JSONP, you must also specify the jsonpCallback argument:

variables.fw.renderData( contentType, resultData, statusCode, callback );
// or:
variables.fw.renderData(
    type = contentType, data = resultData, jsonpCallback = callback
);

You can also specify an HTTP status code as a third argument. The default is 200.

When you use renderData(), no matching view is required for the action being executed.

Designing Services and Domain Objects

Services - and domain objects - should encapsulate all of the business logic in your application. Where possible, most of the application logic should be in the domain objects, making them smart objects, and services can take care of orchestrating work that reaches across multiple domain objects.

Controllers should call methods on domain objects and services to do all the heavylifting in your application, passing specific elements of the request context as arguments. FW/1’s populate() API is designed to allow you to store arbitrary elements of the request context in domain objects.

It is expected that you’ll be using a bean factory, your services will be autowired into your controllers, making it easier to call them directly, without having to worry about how and where to construct those CFCs. Using a bean factory means that your domain objects can also be managed, with services autowired into them as necessary, so your controllers can simply ask the bean factory for a new domain object (or ask a service for it), populate() it from the request context, call methods on the domain object, or pass them to services as necessary.

Services should not know anything about the framework. Service methods should not “reach out” into the request scope to interact with FW/1 - or any other scopes! - they should simply have some declared arguments, perform some operation and return some data.

Services, Domain Objects and Persistence

There are many ways to organize how you save and load data. You could use the ORM that comes with ColdFusion, Lucee, or Railo, you could write your own data mapping service, you could write custom SQL for every domain object. Regardless of how you choose to handle your persistence, encapsulating it in a service CFC is probably a good idea. For convenience it is often worth injecting your persistence service into your domain object so you can have a convenient domainObject.save() call to use from your controller, even if it just delegates to the persistence service internally:

component accessors=true{
    property dataService;
    //...
    function save() {
        variables.dataService.save( this );
    }
}

Using Bean Factories

By default, FW/1 will use DI/1 to manage your controllers and your model. You don’t have to do anything for that to happen automatically.

Note: in previous releases of FW/1 (prior to 3.0), you had to create the bean factory yourself and tell FW/1 about it, in setupApplication(). If you are migrating a 2.x application that uses a bean factory to 3.0, review the Bean Factory Configuration section below to see how to set up your bean factory the same way.

FW/1 & DI/1 expect to find a controllers folder and a model folder in the base of the application tree. Under DI/1’s conventions, controllers/section.cfc becomes sectionController, model/beans/foo.cfc becomes fooBean, and model/services/bar.cfc becomes barService. Other pluralized subfolders under model are treated in a similar fashion. By default, everything is treated as a singleton - a single, unique instance, essentially cached in application scope - except for CFCs in the beans subfolder.

In general, managing dependencies is as simple as adding accessors=true to your component tag, and declaring dependencies with the property keyword, like this:

component accessors=true {
    property userService;
    property securityService;
    //...
}

This will make variables.userService and variables.securityService available, based on model/services/user.cfc and model/services/security.cfc. You could also use long form CFC names like userservice.cfc and securityservice.cfc if you wanted. See the next section for more details on configuring DI/1.

If you let FW/1 use DI/1 to automatically manage your beans, and you are using subsystems, FW/1 will also use it to manage your subsystems’ beans. See Using Subsystems for more details.

Transients, Bean Factory, Framework

All of the above talks about singletons being injected into your controllers and services. There are three important cases that are not standard singletons:

Bean Factory Configuration

Although FW/1 uses DI/1 by default, it also has out-of-the-box support for AOP/1 and WireBox. It can also support other bean factories that follow certain conventions - see Custom Bean Factory Support below for more details.

You tell FW/1 which bean factory to use through the variables.framework.diEngine configuration variable:

Unless you choose "none", FW/1 will use variables.framework.diComponent as the dotted-path of a CFC to construct and use as the bean factory. This configuration variable has a default based on diEngine as follows:

You can override these if you have installed FW/1’s framework folder contents elsewhere. If you specify a diEngine of "custom", you must supply your own value for diComponent.

Note: in order to use AOP/1 you need to manually download it and place it in the framework folder yourself.

The following configuration variables are used in the construction of the bean factory component:

Here’s how those values are used in code to construct the bean factory:

// di1 / aop1:
var bf = new "#variables.framework.diComponent#"(
    variables.framework.diLocations,
    variables.framework.diConfig
);
// wirebox:
var bf = new "#variables.framework.diComponent#"(
    properties = variables.framework.diConfig
);
bf.getBinder().scanLocations( variables.framework.diLocations );
// custom:
var bf = new "#variables.framework.diComponent#"(
    variables.framework.diLocations,
    variables.framework.diConfig
);

If you are using subsystems and also using DI/1 as your default bean factory component, diConfig will be passed to subsystem bean factories when they are constructed. You can override this on a per-subsystem basis by setting diConfig in the specific framework.subsystems configuration structure. Per-subsystem diConfig is new in 3.1.

Migrating 2.x Applications to 3.0

If you migrated through FW/1 2.5 (recommended), you’ll have already dealt with the features that were deprecated in 2.5 and are removed in 3.0. The other changes are that org.corfield.framework has moved to framework.one and both getRC() and getRCValue() have been removed (these changes were deprecated throughout the 3.0 prerelease cycle and removed in the RC cycle).

The final change that you will run into if you were using a bean factory is how FW/1 3.0 manages this automatically now. The simplest migration is to set variables.framework.diEngine to "none" and carry on doing what you were doing (manually creating the bean factory).

The recommended migration is to set the di* configuration variables appropriately to allow FW/1 to take over and manage your bean factory for you. If you are using DI/1, this is likely to be easier than, say, ColdSpring (see Custom Bean Factory Support below). If your DI/1 setup is fairly simple, you won’t need to do much. Here are some examples:

// 2.x setupApplication():
var bf = new framework.ioc("model,controllers");
setBeanFactory(bf);
// 3.0 - no configuration necessary
// just remove those lines from setupApplication()

// 2.x setupApplication():
var bf = new framework.ioc("/model,/app/controllers");
setBeanFactory(bf);
// 3.0 - remove those lines and add this config:
variables.framework = {
    ...
    diLocations = "/model,/app/controllers",
    ...
};

// 2.x setupApplication():
var bf = new path.to.ioc("/model,/app/controllers");
setBeanFactory(bf);
// 3.0 - remove those lines and add this config:
variables.framework = {
    ...
    diComponent = "path.to.ioc",
    diLocations = "/model,/app/controllers",
    ...
};

// 2.x setupApplication():
var bf = new path.to.ioc(
    "/model,/app/controllers",
    { ... config ... }
);
setBeanFactory(bf);
// 3.0 - remove those lines and add this config:
variables.framework = {
    ...
    diComponent = "path.to.ioc",
    diLocations = "/model,/app/controllers",
    diConfig = { ... config ... },
    ...
};

If you use a load listener and call bf.onLoad( myListener ), you use diConfig and add loadListener = myListener to it instead.

If you perform more complex configuration of DI/1 (adding bean declarations etc), add a new function to your Application.cfc that accepts the bean factory as an argument, and then specify that as the loadListener:

// 2.x setupApplication():
var bf = new path.to.ioc(
    "/model,/app/controllers",
    { ... config ... }
);
bf...( ... );
... other bf stuff ...
setBeanFactory(bf);
// 3.0 - move the bf configuration to a load listener function:
function factoryConfig( bf ) {
    bf...( ... );
    ... other bf stuff ...
}
// 3.0 - then remove the 2.x code and add this config:
variables.framework = {
    ...
    diComponent = "path.to.ioc",
    diLocations = "/model,/app/controllers",
    diConfig = { ... config ..., loadListener = factoryConfig },
    ...
};

If you’re still using ColdSpring - which hasn’t been updated in many years now! - you’ll have to use the "custom" diEngine and probably create a wrapper CFC if you want FW/1 to manage it for you (but it’s probably simpler to set diEngine to "none" and continue doing what you’re doing!).

Custom Bean Factory Support

FW/1 can support any bean factory that conforms to the following API:

You can either set diEngine to "none" and do all your configuration manually and then call setBeanFactory() in setupApplication() or you can configure FW/1 to use your bean factory and manage it for you. You may need to write a wrapper CFC.

Here’s an example of writing a wrapper CFC for ColdSpring so you could have FW/1 manage your beans with that. To manually setup ColdSpring as a bean factory, you would need the following in your setupApplication():

var bf = new coldspring.beans.DefaultXmlBeanFactory();
bf.loadBeans( expandPath('config/coldspring.xml') );
setBeanFactory(bf);

The constructor may take two optional arguments (defaultAttributes and defaultProperties) so we need to cater for those, and the actual bean “location” is specified via a file path. This maps well to diLocations for the latter and diConfig for the former pair.

// ioc.ColdSpringAdapter
component extends=coldspring.beans.DefaultXmlBeanFactory {
    function init( filePath, config ) {
        super.init( argumentCollection = config );
        this.loadBeans( filePath );
        return this;
    }
}

Now we can configure FW/1 to use this as follows:

variables.framework = {
    ...
    diEngine = "custom",
    diComponent = "ioc.ColdSpringAdapter",
    diLocations = expandPath('config/coldspring.xml'),
    diConfig = {},
    ...
};

And we could pass in default properties like this:

variables.framework = {
    ...
    diEngine = "custom",
    diComponent = "ioc.ColdSpringAdapter",
    diLocations = expandPath('config/coldspring.xml'),
    diConfig = { defaultProperties = { ... } },
    ...
};

Error Handling

By default, if an exception occurs, FW/1 will attempt to run the main.error action (as if you had asked for ?action=main.error), assuming your defaultSection is main. If you change the defaultSection, that implicitly changes the default error handler to be the error item in that section. The exception thrown is stored directly in the request scope as request.exception. If FW/1 was processing an action when the exception occurred, the name of that action is available as request.failedAction. The default error handling action can be overridden in your Application.cfc by specifying variables.framework.error to be the name of the action to invoke when an exception occurs.

If the specified error handler does not exist or another exception occurs during execution of the error handler, FW/1 provides a very basic fallback error handler that simply displays the exception. If you want to change this behavior, you can either override the fail() method or the onError() method but I don’t intend to “support” that so the only documentation will be in the code!

Note: If you override onMissingView() and forget to define a view for the error handler, FW/1 will call onMissingView() and that will hide the original exception.

Configuring FW/1 Applications

All of the configuration for FW/1 is done through a simple structure in Application.cfc. The default behavior for the application is as if you specified this structure:

variables.framework = {
    action = 'action',
    usingSubsystems = false,
    defaultSubsystem = 'home',
    defaultSection = 'main',
    defaultItem = 'default',
    subsystemDelimiter = ':',
    siteWideLayoutSubsystem = 'common',
    subsystems = { },
    home = 'main.default', // defaultSection & '.' & defaultItem
    // or: defaultSubsystem & subsystemDelimiter & defaultSection & '.' & defaultItem
    error = 'main.error', // defaultSection & '.error'
    // or: defaultSubsystem & subsystemDelimiter & defaultSection & '.error'
    reload = 'reload',
    password = 'true',
    reloadApplicationOnEveryRequest = false,
    generateSES = false,
    SESOmitIndex = false,
    // base = omitted so that the framework calculates a sensible default
    baseURL = 'useCgiScriptName',
    // cfcbase = omitted so that the framework calculates a sensible default
    unhandledExtensions = 'cfc',
    unhandledPaths = '/flex2gateway',
    unhandledErrorCaught = false,
    preserveKeyURLKey = 'fw1pk',
    maxNumContextsPreserved = 10,
    cacheFileExists = false,
    applicationKey = 'framework.one',
    trace = false,
    routes = [ ],
    // resourceRouteTemplates - see routes documentation
    routesCaseSensitive = true,
    noLowerCase = false,
    diEngine = "di1",
    diComponent = "framework.ioc",
    diLocations = "model,controllers",
    diConfig = { }
};

The keys in the structure have the following meanings:

At runtime, this structure also contains the following key (from release 0.4 onward):

This is set automatically by the framework and cannot be overridden (well, it shouldn’t be overridden!).

In addition you can override the base directory for the application, which is necessary when the controllers, model, views and layouts are not in the same directory as the application’s index.cfm file. variables.framework.base should specify the relative path to the directory containing the layouts and views folders, either as a mapped path or a webroot-relative path (i.e., it must start with / and expand to a full file system path). If the controllers and model folders are in that same directory, FW/1 will find them automatically. If you decide to put your controllers and model folders somewhere else, you can also specify variables.framework.cfcbase as a dotted-path to those components, e.g., com.myapp.cfcs assuming that com.myapp.cfcs.controllers.Controller maps to your Controller.cfc and com.myapp.cfcs.model.services.Service maps to your Service.cfc.

URL Routes

In addition to the standard /section/item URLs that FW/1 supports, you can also specify routes that are URL patterns, optionally containing variables, that map to standard /section/item URLs.

To use routes, specify variables.framework.routes as an array of structures, where each structure specifies mappings from routes to standard URLs. The array is searched in order and the first matching route is the one selected (and any subsequent match is ignored). This allows you to control which route should be used when several possibilities match.

Placeholder variables in the route are identified by a leading colon and can appear in the URL as well, for example { "/product/:id" = "/product/view/id/:id" } specifies a match for /product/something which will be treated as if the URL was /product/view/id/something - section: product, item: view, query string id=something.

Routes can also be restricted to specific HTTP methods by prefixing them with $ and the method, for example { "$POST/search" = "/main/search" } specifies a match for a POST on /search which will be treated as if the URL was /main/search - section: main, item: search. A GET operation will not match this route.

Routes can also specify a redirect instead of a substitute URL by prefixing the URL with an HTTP status code and a colon, for example { "/thankyou" = "302:/main/thankyou" } specifies a match for /thankyou which will cause a redirect to /main/thankyou.

A route of "*" is a wildcard that will match any request and therefore must be the last route in the array. A wildcard route may be restricted to a specific method, e.g., "$POST*" will match a POST to any URL.

Route matches are case-sensitive unless you set routesCaseSensitive to false in the FW/1 configuration.

The keyword "$RESOURCES" can be used as a shorthand way of specifying resource routes: { "$RESOURCES" = "dogs,cats,hamsters,gerbils" }. FW/1 will interpret this as if you had specified a standard set of routes for each of the listed resources. For example, for the resource “dogs”, FW/1 will parse the following routes:

{ "$GET/dogs/$" = "/dogs/default" },
{ "$GET/dogs/new/$" = "/dogs/new" },
{ "$POST/dogs/$" = "/dogs/create" },
{ "$GET/dogs/:id/$" = "/dogs/show/id/:id" },
{ "$PATCH/dogs/:id/$" = "/dogs/update/id/:id", "$PUT/dogs/:id/$" = "/dogs/update/id/:id" },
{ "$DELETE/dogs/:id/$" = "/dogs/destroy/id/:id" }

There are also some additional resource route settings that can be specified. First you should note that the following three lines are equivalent:

{ "$RESOURCES" = "dogs,cats,hamsters,gerbils" },
{ "$RESOURCES" = [ "dogs","cats","hamsters","gerbils" ] },
{ "$RESOURCES" = { resources = "dogs,cats,hamsters,gerbils" } }

The first two lines are shorthand ways of specifying the full configuration struct given in the third line. An example of a full configuration struct would be the following:

{
    resources = "dogs",
    methods = "default,create,show",
    pathRoot = "/animals",
    nested = "..."/[...]/{...}
}

The key "methods", if specified, limits the generated routes to the method names listed.

The key "pathRoot", if specified, is prepended to the generated route paths, so, given the above configuration struct, you get routes such as { "$GET/animals/dogs/:id" = "/dogs/show/id/:id" }.

Alternatively (or in addition), you can specify a subsystem: subsystem = "animals", which generates routes such as { "$GET/animals/dogs/:id" = "/animals:dogs/show/id/:id" }.

The key "nested" is used to indicate resources which should be nested under another resource, and again can be specified as a string list, an array, or a struct. For example: { "$RESOURCES" = { resources = "posts", nested = "comments" } } results in all of the standard routes for "posts", and in addition generates nested routes for "comments" such as { "$GET/posts/:posts_id/comments" = "/comments/default/posts_id/:posts_id" }. Here it should be noted that the convention is to map the parent resource key to the variable name "#resource#_id". Also, you cannot specify a path root or subsystem for a nested resource as it inherits these from its parent resource.

The specific routes that FW/1 generates are determined by the variables.framework.resourceRouteTemplates array. By default it looks like the following:

 variables.framework.resourceRouteTemplates = [
     { method = 'default', httpMethods = [ '$GET' ] },
     { method = 'new', httpMethods = [ '$GET' ], routeSuffix = '/new' },
     { method = 'create', httpMethods = [ '$POST' ] },
     { method = 'show', httpMethods = [ '$GET' ], includeId = true },
     { method = 'update', httpMethods = [ '$PUT','$PATCH' ], includeId = true },
     { method = 'destroy', httpMethods = [ '$DELETE' ], includeId = true }
];

If you wish to change the controller methods the routes are mapped to, for instance, you can specify this array in your Application.cfc and then change the default method names. For example, if you want "$GET/dogs/$" to map to "/dogs/index", you would change method = 'default' to method = 'index' in the first template struct.

A route structure may also have documentation by specifying a hint: { "/product/:id" = "/product/view/id/:id", hint = "Display a product" }.

Here’s an example showing all the features together:

variables.framework.routes = [
    { "/product/:id" = "/product/view/id/:id", "/user/:id" = "/user/view/id/:id",
      hint = "Display a specific product or user" },
    { "/products" = "/product/list", "/users" = "/user/list" },
    { "/old/url" = "302:/new/url" },
    { "$GET/login" = "/not/authorized", "$POST/login" = "/auth/login" },
    { "$RESOURCES" = { resources = "posts", subsystem = "blog", nested = "comments,tags" } },
    { "*" = "/not/found" }
];

Environment Control

FW/1 supports _environment control - the ability to automatically detect your application environment (development, production, etc) and adjust the framework configuration accordingly. There are three components to environment control:

Environment control is based on the concept of tier - development, staging, production etc - and optionally a server specifier. This two-part string determines how elements of variables.framework.environments are selected and merged into the base framework configuration. A string of the format "tier" or "tier-server" should be returned from getEnvironment(). FW/1 first looks for a group of options matching just tier and, if found, appends those to the base configuration. FW/1 then looks for a group of options matching tier-server and, if found, appends those to the configuration. After merging configuration options, FW/1 calls setupEnvironment() passing the tier/server string so your application may perform additional customization. This process is executed on every request (so be aware of performance considerations) which allows a single application to serve multiple domains and behave accordingly for each domain, for example.

Note that for the most part, the tier or tier-server configuration will override any default configuration in the variables.framework structure. There are two exceptions to that basic rule:

This gives the most intuitive behavior for DI/1 bean factory configuration. It also provides a convenient behavior for environment-based subsystem configuration. Be cautious when specifying subsystem-specific DI/1 configuration since that does not merge across environments. Note that environment merging is new in 3.1.

Your getEnvironment() function can use any means to determine which environment is active. Common methods are examining CGI.SERVER_NAME or using the server’s actual hostname (accessible thru the new getHostname() API method). Here’s an example setup:

public function getEnvironment() {
    if ( findNoCase( "www", CGI.SERVER_NAME ) ) return "prod";
    if ( findNoCase( "dev", CGI.SERVER_NAME ) ) return "dev";
    else return "dev-qa";
}

variables.framework.environments = {
    dev = { reloadApplicationOnEveryRequest = true, error = "main.detailederror" },
    dev-qa = { reloadApplicationOnEveryRequest = false },
    prod = { password = "supersecret" }
};

With this setup, if the URL contains www, e.g., www.company.com, the tier will be production ("prod") and the reload password will be changed to "supersecret". If the URL contains dev, e.g., dev.company.com, the tier will be development ("dev") and the application will reload on every request. In addition, a detailed error page will be used instead of the default. Otherwise, the tier will still be development ("dev") but the environment will be treated as a QA server: the development error setting will still be in effect but the framework will no longer reload on every request.

Here is another example:

public function getEnvironment() {
    var hostname = getHostname();
    if ( findNoCase( "local", hostname ) ) return "dev-" & listFirst( hostname, "-" );
    var svrname = listFirst( hostname, "." ); // drop domain name etc
    switch ( svrname ) {
        case "proserver14a": return "prod-1";
        case "proserver15c": return "prod-2";
        case "proserver22x": return "prod-3";
        case "proserver03b": return "qa";
        default: return "dev-unknown";
    }
}

This maps local hostnames to specific developers machines (e.g., my development machine is called Sean-Corfields-iMac.local and my team’s machines follow similar naming). It specifically identifies the three servers in the production cluster and the QA server. All other environments are treated as development with an unknown server specifier.

If you want to ensure that all environments are known configurations, your setupEnvironment() function can halt the application if a default environment is detected.

Setting up application, session and request variables

The easiest way to setup application variables is to define a setupApplication() method in your Application.cfc and put the initialization in there. This method is automatically called by FW/1 when the application starts up and when the FW/1 application is reloaded.

The easiest way to setup session variables is to define a setupSession() method in your Application.cfc and put the initialization in there. This method is automatically called by FW/1 as part of onSessionStart().

The easiest way to setup request variables (or even global variables scope) is to define a setupRequest() method in your Application.cfc and put the initialization in there. Note that if you set variables scope data, it will be accessible inside your views and layouts but not inside your controllers or services.

Using Subsystems

The subsystems feature allows you to combine existing FW/1 applications as modules of a larger FW/1 application. The subsystems feature was contributed by Ryan Cogswell and the documentation was written by Dutch Rapley. Read about Using Subsystems to combine FW/1 applications.

Accessing the FW/1 API

FW/1 uses the request scope for some of its temporary data so that it can communicate between Application.cfc lifecycle methods without relying on variables scope (and potentially interfering with user data in variables scope). The Reference Manual specifies which request scope variables are used and what you may and may not do with them.

In addition, the API of FW/1 is exposed to controllers, views and layouts in a particular way as documented below.

Controllers and the FW/1 API

Each controller method is passed the request context as a single argument called rc, of type struct. If access to the FW/1 API is required inside a controller, you can define an init() method (constructor) which takes a single argument, of type any, and when FW/1 creates the controller CFC, it passes itself in as the argument to init(). Your init() method should save that argument in the variables scope for use within the controller methods:

function init(fw) {
    variables.framework = fw;
    return this;
}

function setBeanFactory( beanFactory ) {
    variables.beanFactory = beanFactory;
}

Alternatively, you can declare a dependency on the framework like this:

property beanFactory;
property framework;

Then you could call any framework method:

 var user = variables.beanFactory.getBean("user");
 variables.framework.populate(user);

This will call setXxx() methods on the user bean, passing in matching elements from the request context. An optional second argument may be provided that specifies the keys to populate (the default is to attempt to match against every setXxx() method on the bean):

variables.framework.populate(user,'firstName, lastName, email');

This will call setFirstName(), setLastName() and setEmail() on the user bean, passing in matching elements from the request context.

The other framework methods that are useful for controllers are:

variables.framework.redirect( action, preserve, append, path, queryString );

where action is the action to redirect to, preserve is a list of request context keys that should be preserved across the redirect (using session scope) and append is a list of request context keys that should be appended to the redirect URL. preserve and append can both be omitted and default to none, i.e., no values preserved or appended. The optional path argument allows you to force a new base URL to be used (instead of the default variables.framework.baseURL which is normally CGI.SCRIPT_NAME). queryString allows you to specify additional URL parameters and/or anchors to be added to the generated URL. See the Reference Manual for more details.

I cannot imagine other FW/1 API methods being called from controllers at this point but the option is there if you need it.

Views/Layouts and the FW/1 API

As indicated above under the “in depth” paragraph about views and layouts, the entire FW/1 API is available to views and layouts directly (effectively in the variables scope) because of the way views and layouts are executed. This allows views and layouts to access utility beans from the bean factory, such as formatting services, as well as render views and, if necessary, other layouts. Views and layouts also have access to the framework structure which contains the action key - which could be used for building links:

<a href="?#framework.action#=section.item">Go to section.item</a>

But you’re better off using the buildURL() API method:

<a href="#buildURL( 'section.item' )#">Go to section.item</a>

You can provide additional query string values to buildURL():

<a href="#buildURL( 'section.item?arg=val' )#">Go to section.item with arg=val in URL</a>
<a href="#buildURL( action = 'section.item', queryString = 'arg=val' )#">Go to section.item with arg=val in URL</a>

I cannot imagine a view or layout needing full access to the FW/1 API methods beyond view(), layout() and getBeanFactory() but the option is there if you need it.

Convenience Methods in the FW/1 API

FW/1 provides a number of convenience methods for manipulating the action value to extract parts of the action (the action argument is optional in all these methods and defaults to the currently requested action):